 -
Full Version
Condensed
Specs.
Part 1 General
1.01 Section Includes
A. Manual Rollershades and hardware.
1.02 System Description
A. Clutch operated translucent rollershades with bead chain
control.
1.03 Submittals
A. Product data: Submit five copies of manufacturers technical
data and installations instructions.
B. Samples: Submit three samples of each shade cloth with
complete color swatch.
C. Shop Drawings: Submit drawings of mechanical products with
appropriate dimensions.
1.04 Quality Assurance
A. The manufacturer of these products shall show a minimum
of 20 years documented experience.
B. The installer shall show a minimum of 3 years experience
with these systems.
Part 2 Products
2.01 Manufacturers
A. SOS™ “Sun Or Shade”, a division of Inside
Outfitters, Inc.
5725 Avery Rd., Dublin, Ohio 43016
Ph: 800.742.3372, Fx: 877.880.3496, E: info@sos-shades.com
2.02 Materials
A. Shade Fabrics:
Translucent fabrics with openness factors of 1-25%. The fabric
color shall be selected from standard color line unless SWSPECIALS
is selected. SWSPECIALS allows specifier to create custom
color (minimum quantities required). The fabric is to be colorfast
and shall not be affected by moisture or heat.
1. Phifer:
2. 3G Mermet:
3. Hexcel:
4. Verosol: (PVC free)
B. Tube: The fabric shades shall be mounted on to 1 ¼”,
1 ½”, 2”, or 2 ½” diameter
aluminum tube depending on the width of the shade and fabric
chosen for the shade.
C. Bead Chain Clutch: The clutch incorporates an adjustable
slip clutch to control the rate of fall from free running
zero friction factor to a factor of 100%. The shade may be
adjusted to stop and hold at any position. The bead chain
shall contain automatic stops to prevent the shade from over
winding or unrolling off the tube. The bead chain may be either
PVC or metal ball type.
D. Easy Lift™: This option is added to all shades that
are over 30 pounds.
E. Shade Mounting Brackets: Shall be manufactured from .060”
galvanized steel, reversible for right and left hand mounting.
The brackets may be field mounted inside, outside or ceiling
mounted. Fascia brackets shall be painted to match Fascia
color.
F. Hembar: Shall be a continuous aluminum bar 1” X
3/16” with sufficient weight to allow the shade to close
without buckling or sagging.
G. Fascia System (Option): All fascia systems shall be prime
painted with baked enamel utilizing the powder paint method
to ensure an environmental friendly application. Wet paint
method shall not be accepted.
H. Pocket System (Option): This system allows the shade to
be recessed into the ceiling.
|
-
Full Version
Condensed
Specs.
Part 1 General
1.01 Section Includes
A. Manual Rollershades and hardware.
1.02 System Description
A. Clutch operated translucent rollershades with bead chain
control.
1.03 Submittals
A. Product data: Submit five copies of manufacturers technical
data and installations instructions.
B. Samples: Submit three samples of each shade cloth with
complete color swatch.
C. Shop Drawings: Submit drawings of mechanical products with
appropriate dimensions.
1.04 Quality Assurance
A. The manufacturer of these products shall show a minimum
of 20 years documented experience.
B. The installer shall show a minimum of 3 years experience
with these systems.
Part 2 Products
2.01 Manufacturers
A. SOS™ “Sun Or Shade”, a division of Inside
Outfitters, Inc.
5725 Avery Rd., Dublin, Ohio 43016
Ph: 800.742.3372, Fx: 877.880.3496, E: info@sos-shades.com
2.02 Materials
A. Shade Fabrics:
Translucent fabrics with openness factors of 1-25%. The fabric
color shall be selected from standard color line unless SWSPECIALS
is selected. SWSPECIALS allows specifier to create custom
color (minimum quantities required). The fabric is to be colorfast
and shall not be affected by moisture or heat.
1. Phifer:
2. 3G Mermet:
3. Hexcel:
4. Verosol: (PVC free)
B. Tube: The fabric shades shall be mounted on to a Keyed
1 ¼” or 1 ½” diameter aluminum tube
depending on the width of the shade and fabric chosen for
the shade. Keyed tube provides greater dimensional stability
supporting the shade and ensures that the clutch is securely
locked into place.
C. Bead Chain Clutch: The nylon clutch incorporates “Velvetrol”
control ensuring the rate of fall from free running zero friction
factor to a factor of 100% utilizing 20% lower input torque
than standard series. The shade may be adjusted to stop and
hold at any position. The bead chain shall contain automatic
stops to prevent the shade from over winding or unrolling
off the tube. The bead chain may be either PVC or metal ball
type. (Finishes: See specification section “ACCESSORIES”,
Bead chain and Clutch for color selection.)
D. Spring Loaded Pin End: Each shade shall have a “spring
loaded” end cap; no static end caps shall be accepted.
Pin end allows for ¼” tolerance.
E. Shade Mounting Brackets: Shall be manufactured from .060”
galvanized steel, reversible for right and left hand mounting.
The brackets may be field mounted inside, outside or ceiling
mounted. Fascia brackets shall be painted to match Fascia
color.
F. Bracket Covers for “Fascia or No Fascia”(Optional):
Universal bracket covers provide a finished aesthetic quality
to exposed brackets. Standard colors: White, Black. Custom
color available upon request (minimum quantities required.)
G. Hembar: Shall be a continuous aluminum bar 1” X
3/16” with sufficient weight to allow the shade to close
without buckling or sagging.
H. Fascia System (Option): All fascia systems shall be prime
painted with baked enamel utilizing the powder paint method
to ensure an environmental friendly application. Wet paint
method shall not be accepted.
I. Pocket System (Option): This system allows the shade to
be recessed into the ceiling.
|
