 -
Full Version
Condensed Specs.
Part 1 General
1.01 Section Includes
A. Black out shades and hardware.
1.02 System Description
A. Clutch operated black out rollershades with bead chain
control, side/sill channels, and fascia.
1.03 Submittals
A. Product data: Submit five copies of manufacturers technical
data and installations instructions.
B. Samples: Submit three samples of each shade cloth with
complete color swatch.
C. Shop Drawings: Submit drawings of mechanical products with
appropriate dimensions.
1.04 Quality Assurance
A. The manufacturer of these products shall show a minimum
of 20 years documented experience.
B. The installer shall show a minimum of 3 years experience
with these systems.
Part 2 Products
2.01 Manufacturers
A. SOS™ "Sun or Shade", a division of
Inside Outfitters, Inc.
5725 Avery Rd., Dublin, Ohio 43016
Ph: 800.742.3372, Fx: 877.880.3496, E: info@sos-shades.com
2.02 Materials
A. Shade Fabrics: The fabric shall have a high degree of opacity
for effective control of light. The fabric must have sufficient
rigidity to insure straight hanging, resist curl, twist, bowing
and distortion. It must be dimensionally stable and will not
shrink or stretch. The color shall be selected from standard
colors. All seams are to be heat-sealed. Sewing is not accepted.
B. Tube: The fabric shades shall be mounted on to 1 ¼,
1 ½”, 2” or 2 ½” diameter
aluminum tube depending on the width of the shade and fabric
chosen for the shade.
C. Bead Chain Clutch: The clutch incorporates an adjustable
slip clutch to control the rate of fall from free running
zero friction factor to a factor of 100%. The shade may be
adjusted to stop and hold at any position. The bead chain
shall contain automatic stops to prevent the shade from over
winding or unrolling off the tube. The bead chain may be either
PVC or metal ball type.
D. Easy Lift™: This option is added to all shades that
are over 30 pounds.
E. Shade Mounting Brackets: Shall be manufactured from .060”
galvanized steel, reversible for right and left hand mounting.
The brackets may be field-mounted inside, outside or ceiling
mounted. Fascia brackets shall be painted to match Fascia
color.
F. Hembar: Shall be a continuous aluminum bar 1” X
3/16” with sufficient weight to allow the shade to close
without buckling or sagging.
G. Side (Sill) Channels: Extruded aluminum channel through
which each side of a shade travels to create blackout application.
The rails shall contain soft brushes on a minimum of one side
depending on application to enclose the fabric shade in a
light tight condition. The side and bottom channels should
be installed in a light bead of caulking to prevent light
penetration.
H. Fascia System: All fascia systems shall be prime painted
with baked enamel utilizing the powder paint method to ensure
an environmentally friendly application. Wet paint method
shall not be accepted.
I. Pocket System (Option): This system allows the shade to
be recessed into the ceiling. |
-
Full Version
Condensed Specs.
Part 1 General
1.01 Section Includes
A. Black out shades and hardware.
1.02 System Description
A. Clutch operated black out rollershades with bead chain
control, side/sill channels, and fascia.
1.03 Submittals
A. Product data: Submit five copies of manufacturers technical
data and installations instructions.
B. Samples: Submit three samples of each shade cloth with
complete color swatch.
C. Shop Drawings: Submit drawings of mechanical products with
appropriate dimensions.
1.04 Quality Assurance
A. The manufacturer of these products shall show a minimum
of 20 years documented experience.
B. The installer shall show a minimum of 3 years experience
with these systems.
Part 2 Products
2.01 Manufacturers
A.SOS™ "Sun or Shade", a division of Inside
Outfitters, Inc.
5725 Avery Rd., Dublin, Ohio 43016
Ph: 800.742.3372, Fx: 877.880.3496, E: info@sos-shades.com
2.02 Materials
A. Shade Fabrics: The fabric shall have a high degree of opacity
for effective control of light. The fabric must have sufficient
rigidity to insure straight hanging, resist curl, twist, bowing
and distortion. It must be dimensionally stable and will not
shrink or stretch. The color shall be selected from standard
colors. All seams are to be heat-sealed. Sewing is not accepted.
B. Tube: The fabric shades shall be mounted on to a Keyed
1 ¼” or 1 ½”diameter aluminum tube
depending on the width of the shade and fabric chosen for
the shade. Keyed tube provides greater dimensional stability
supporting the shade and ensures that the clutch is securely
locked into place.
C. Bead Chain Clutch: The nylon clutch incorporates “Velvetrol”
control ensuring the rate of fall from free running zero friction
factor to a factor of 100% utilizing 20% lower input torque
than standard series. The shade may be adjusted to stop and
hold at any position. The bead chain shall contain automatic
stops to prevent the shade from over winding or unrolling
off the tube. The bead chain may be either PVC or metal ball
type.
D. Spring Loaded Pin End: Each shade shall have a “spring
loaded” end cap; no static end caps shall be accepted.
Pin end allows for ¼” tolerance.
E. Shade Mounting Brackets: Shall be manufactured from .060”
galvanized steel, reversible for right and left hand mounting.
The brackets may be field mounted inside, outside or ceiling
mounted. Fascia brackets shall be painted to match Fascia
color.
F. Bracket Covers for “Fascia or No Fascia” (Optional):
Universal bracket covers provide a finished aesthetic quality
to exposed brackets. Standard colors: White, Black. Custom
color available upon request (minimum quantities required,
surcharge applies).
G. Hembar: Shall be a continuous aluminum bar 1” X
3/16” with sufficient weight to allow the shade to close
without buckling or sagging.
H. Fascia System: All fascia systems shall be prime painted
with baked enamel utilizing the powder paint method to ensure
an environmental friendly application. Wet paint method shall
not be accepted.
I. Side (Sill) Channels: Extruded aluminum channel through
which each side of a shade travels to create blackout application.
The rails shall contain soft brushes on a minimum of one side
depending on application to enclose the fabric shade in a
light tight condition. The side and bottom channels should
be installed in a light bead of caulking to prevent light
penetration.
J. Pocket System (Option): This system allows the shade to
be recessed into the ceiling. |
